ʻO ka wehewehe ʻana i ke kaʻina hana

Hana ʻia ka laid scrim i ʻekolu mau pae kumu:

• KaʻAnuʻu Hana 1: Hānai ʻia nā ʻāpana wiliwili mai nā kaola ʻāpana a i ʻole mai kahi creel.
• KaʻAnuʻu Hana 2: Hoʻomoe kahi mea ʻōniʻoniʻo kūikawā, a i ʻole turbine, i nā wili keʻa i ka wikiwiki kiʻekiʻe ma waena a i ʻole ma waena o nā ʻāpana warp. Hoʻopili koke ʻia ka scrim me kahi ʻōnaehana adhesive e hōʻoia i ka hoʻopaʻa ʻana o nā mīkini-a me nā wili kuhikuhi.
• KANAWAI 3: Hoʻomaloʻo ʻia ka scrim, mālama ʻia me ka wela a ʻeha ʻia ma kahi paipu e kekahi mea ʻokoʻa.

ʻO nā lipine ʻaoʻao ʻelua e ʻae iā ʻoe e hoʻopaʻa i nā papa ʻelua me ka wikiwiki a me ka maʻalahi, e hāʻawi iā ʻoe i kahi paʻa kiʻekiʻe, hilinaʻi a paʻa.

Hāʻawi kēia mau lipine hana kiʻekiʻe iā ʻoe i nā hoʻonā hoʻopaʻa hoʻopaʻa waiwai a me ka hoʻolako ʻana i nā hiki ke hoʻokō i nā noi paʻakikī loa.

Hoʻokomo ʻia nā noi lipine ʻaoʻao ʻelua

• ʻO ka huʻa, ka manaʻo a me ka lamination lole
• Kaʻa i loko, haʻahaʻa VOC
• Hōʻailona, ​​hae a hōʻike
• Nā papa inoa, hoʻopaʻa inoa a me ka hōʻailona
• EPDM profiles a extrusions
• Nā polokalamu paʻi a me nā kiʻi
• ʻO ka lipine pipili ʻaoʻao ʻelua no nā aniani
• ʻO nā mea hoʻonā kiʻekiʻe o ka Packaging Tape

He aha ke ʻano o ka Foam Tape?

• ʻO ka lipine foam i loko o kahi waihona pahu puka hāmama / pani ʻia e like me: Polyethylene (PE), polyurethane (PU) a me PET, i uhi ʻia me ka acrylic hana kiʻekiʻe a i ʻole ka lāʻau paʻa, kūpono loa ia no ka sila a me ka hoʻopaʻa paʻa mau.

• ʻO nā hiʻohiʻona o ka lipine pua
• • Ka ikaika tensile ikaika a me ka ikaika paʻa
• • ʻO ka abrasion maikaʻi, kaʻinoʻino a me ka maʻamau
• • Hiki ke hoʻohana ʻia ma nā wahi like ʻole
• • Ka waiwai mechanical maikaʻi, maʻalahi e make i ka ʻoki a me ka laminating
• • Mānoanoa like ʻole no nā noi like ʻole
• • Hiki ke hoʻohana ʻia ke kūpaʻa wela maikaʻi ma kahi wahi anuanu

• Nā noi no ka lipine puʻupuʻu?

• Hoʻohana nui ʻia nā lipine foam ʻaoʻao ʻelua no ka hoʻopaʻa ʻana a i ʻole ka hoʻopaʻa paʻa mau ʻana, ke sila ʻana, ka hoʻopili ʻana, ka hoʻoheheʻe ʻana i ke kani, ka insulation thermal, a me ka hoʻopiha piha ʻana. Hiki mai nā lipine foam i nā ʻano mānoanoa, a maʻalahi hoʻi e make ʻoki.

Nā noi

• Hoʻopaʻa
• ʻO ka hoʻokaʻawale
• Ke kau ʻana
• Palekana
• Sila ʻana

ʻO nā kiʻiʻoniʻoni adhesive me ka scrim e hoʻonui liʻiliʻi wale i ka mānoanoa ma muli o nā kaula polyester i hoʻokomo ʻia a like me nā lipine liʻiliʻi liʻiliʻi liʻiliʻi, kūpono no nā noi e koi ana i ka mānoanoa haʻahaʻa.

Eia nō naʻe, hāʻawi lākou i kekahi mau mea maikaʻi: Ma muli o ka hoʻoikaika ʻana i ka scrim ua ʻoi aku ka paʻa a hiki ke hana maʻalahi ʻia, e laʻa me ka ʻoki ʻana i nā ʻōwili. ʻO ke kiʻi hoʻopaʻa paʻa hoʻi e hoʻomaʻamaʻa i ka manual a me ka mīkini hana o ka lipine adhesive.

He kūpono nā lipine Scrim no ka hoʻopaʻa ʻana i nā ʻāpana ākea a me nā ʻāpana liʻiliʻi e like me ka hoʻopaʻa ʻana i nā baseboards a i ʻole nā ​​​​pili plastik like ʻole. ʻOiai ʻo ka scrim intermediate carrier, ʻoi aku ka maikaʻi o ke kumu kūʻai.

Nā hiʻohiʻona huahana:

Kiʻekiʻe hoʻoheheʻe wela wela adhesive

ʻOi aku ka kiʻekiʻe kiʻekiʻe adhesion mua a hope

Kiʻiʻoniʻoni hoʻopili lahilahi, hoʻopaʻa ʻia e ka scrim polyester

Maʻalahi e hoʻouka, silicone-coated release liner i hana ʻia me ka pepa

He kūpono no nā mea like ʻole, a me nā mea haʻahaʻa haʻahaʻa

Loaʻa nā ʻano lola lāʻau a ʻoki ʻoki ʻia

ʻO nā hui like ʻole o nā yarns, binder, mesh nui, loaʻa nā mea āpau. E ʻoluʻolu e haʻi mai iā mākou inā loaʻa iā ʻoe nā koi hou aʻe. Nui ko mākou hauʻoli e lilo i kāu lawelawe.

Hoʻolālā, hana a hoʻolaha ʻo Ruifiber i nā mea a me nā hoʻonā i mea nui i ka pono o kēlā me kēia a me ka wā e hiki mai ana. Hiki ke loaʻa iā lākou ma nā wahi āpau ma ko mākou mau wahi noho a me ko mākou ola i kēlā me kēia lā: ma nā hale, ka halihali, nā ʻoihana a me nā noi ʻoihana he nui. Hāʻawi lākou i ka hōʻoluʻolu, ka hana a me ka palekana i ka wā e hoʻoponopono ai i nā pilikia o ke kūkulu hoʻomau, ka pono waiwai a me ka hoʻololi ʻana i ke aniau.