A na-edobe akwa akwa polyester maka akwụkwọ na-etinye ọbara maka ahụike maka mba Middle East

Nkọwa dị mkpirikpi:

Obosara mpịakọta:200 ka 2500 mm

Ogologo mpịakọta::Ruo 50 000 m

Ụdị Yarn::Glass, Polyester, Carbon, Cotton, Flax, Jute, Viscose, Kevlar, Nomex,

Ihe owuwu::Square, tri-directional

Ụkpụrụ::Site na 0.8 yarn / cm ruo 3 yarn / cm

Nkwekọrịta::PVOH, PVC, acrylic, ahaziri

Zitere anyị email Budata dị ka PDF

Nkọwa ngwaahịa

Mkpado ngwaahịa

Mmalite nkenke nke Polyester Laid Scrims

Scrim bụ akwa na-eme ka ọ dị mma nke sitere na yarn filament na-aga n'ihu n'ihe owuwu ntupu mepere emepe. Usoro nrụpụta scrim etinyere na kemịkalụ jikọtara yarn na-enweghị kpara ọnụ, na-eme ka scrim nwee njirimara pụrụ iche.

Ruifiber na-eme scrims pụrụ iche iji nye iwu maka ojiji na ngwa akọwapụtara. Ndị a na-ejikọta kemịkalụ scrim na-enye ndị ahịa anyị aka ịkwado ngwaahịa ha n'ụzọ dị oke ọnụ ahịa. Emebere ha iji mejuo arịrịọ ndị ahịa anyị, yana ka ọ dabara nke ọma na usoro na ngwaahịa ha.

Njirimara Polyester Laid Scrims

Ike ọdụdọ
Mgbochi anya mmiri
Okpomọkụ akara
Njirimara mgbochi microbial
Mmiri na-eguzogide
Nrapara onwe ya
Eco-enyi na enyi
Enwere ike ire ere
Enwere ike imegharị ya

Akwụkwọ mpempe akwụkwọ Polyester Laid Scrims

Ihe Mba.	CF12.5*12.5PH	CF10*10PH	CF6.25*6.25PH	CF5*5PH
Nha ntupu	12.5 x 12.5mm	10 x 10mm	6.25 x 6.25mm	5 x5mm
Ibu (g/m2)	6.2-6.6g/m2	8-9g/m2	12-13.2g/m2	15.2-15.2g/m2

The mgbe ọkọnọ nke na-abụghị kpara mkwado na laminated scrim bụ 12.5x12.5mm,10x10mm,6.25x6.25mm, 5x5mm,12.5x6.25mm wdg The mgbe ọkọnọ grams bụ 6.5g, 8g, 13g, 15.5g, wdg.Site na ike dị elu na ịdị arọ dị arọ, ọ nwere ike jikọta ya na ihe ọ bụla na ogologo mpịakọta ọ bụla nwere ike ịbụ mita 10,000.

Ngwa Polyester Laid Scrims

a) Aluminom foil mejupụtara

A na-etinye scrim n'ụdị Nove-akpa n'ọtụtụ ebe na ụlọ ọrụ foil aluminum. Ọ nwere ike inye aka n'ichepụta mmepụta mmepụta ihe dị ka ogologo mpịakọta nwere ike iru 10000m. Ọ na-emekwa ka emechara ngwaahịa na mma apperance.

b) Ala PVC

PVC Flooring bụ tumadi mere nke PVC, nakwa ndị ọzọ dị mkpa chemical ihe n'oge mmepụta. A na-emepụta ya site na calending, ọganihu extrusion ma ọ bụ ọganihu mmepụta ihe ọzọ, a na-ekewa ya na PVC Sheet Floor na PVC Roller Floor. Ugbu a, ndị na-emepụta ihe niile dị n'ime ụlọ na ndị mba ọzọ na-etinye ya dị ka oyi akwa nkwado iji zere njikọ ma ọ bụ nkwụsị n'etiti iberibe, nke a na-eme site na mgbasawanye ọkụ na nkwụsị nke ihe.

c) Ngwaahịa ụdị nke anaghị kpara akwa gbasiri ike

A na-eji scrim nke etinyere akwa akwa n'ọtụtụ ebe dị ka akwa akwa siri ike n'ụdị akwa anaghị kpara akpa, dị ka anụ ahụ fiberglass, akwa polyester, na-ehichapụ, yana ụfọdụ nsọtụ elu, dị ka akwụkwọ ahụike. Ọ nwere ike na-eme ka ọ dịghị onye kpara ike na elu tensile ike, ebe dị nnọọ tinye nnọọ obere unit arọ.