Ngwongwo netting polyester debere Scrims maka imepụta ọkpọkọ FRP maka mba Middle East

Nkọwa dị mkpirikpi:

Obosara mpịakọta:200 ka 2500 mm

Ogologo mpịakọta::Ruo 50 000 m

Ụdị Yarn::Glass, Polyester, Carbon, Cotton, Flax, Jute, Viscose, Kevlar, Nomex,

Ihe owuwu::Square, tri-directional

Ụkpụrụ::Site na 0.8 yarn / cm ruo 3 yarn / cm

Nkwekọrịta::PVOH, PVC, acrylic, ahaziri

Zitere anyị email Budata dị ka PDF

Nkọwa ngwaahịa

Mkpado ngwaahịa

Mmalite nkenke nke Polyester Laid Scrims

Scrim bụ akwa na-eme ka ọ dị mma nke sitere na yarn filament na-aga n'ihu n'ihe owuwu ntupu mepere emepe. Usoro nrụpụta scrim etinyere na kemịkalụ jikọtara yarn na-enweghị kpara ọnụ, na-eme ka scrim nwee njirimara pụrụ iche.

Ruifiber na-eme scrims pụrụ iche iji nye iwu maka ojiji na ngwa akọwapụtara. Ndị a na-ejikọta kemịkalụ scrim na-enye ndị ahịa anyị aka ịkwado ngwaahịa ha n'ụzọ dị oke ọnụ ahịa. E mere ha iji mejuo arịrịọ ndị ahịa anyị, yana ka ha kwekọọ na usoro na ngwaahịa ha.

Njirimara Polyester Laid Scrims

Ike ọdụdọ
Mgbochi anya mmiri
Okpomọkụ akara
Njirimara mgbochi microbial
Mmiri na-eguzogide
Nrapara onwe ya
Eco-enyi na enyi
Enwere ike ire ere
Enwere ike imegharị ya

Akwụkwọ mpempe akwụkwọ Polyester Laid Scrims

Ihe Mba.	CF12.5*12.5PH	CF10*10PH	CF6.25*6.25PH	CF5*5PH
Nha ntupu	12.5 x 12.5mm	10 x 10mm	6.25 x 6.25mm	5 x5mm
Ibu (g/m2)	6.2-6.6g/m2	8-9g/m2	12-13.2g/m2	15.2-15.2g/m2

The mgbe ọkọnọ nke na-abụghị kpara mkwado na laminated scrim bụ 12.5x12.5mm,10x10mm,6.25x6.25mm, 5x5mm,12.5x6.25mm wdg The mgbe ọkọnọ grams bụ 6.5g, 8g, 13g, 15.5g, wdg.Site na ike dị elu na ịdị arọ dị arọ, ọ nwere ike jikọta ya na ihe ọ bụla na ogologo mpịakọta ọ bụla nwere ike ịbụ mita 10,000.

Ngwa Polyester Laid Scrims

a) Aluminom foil mejupụtara

A na-etinye scrim n'ụdị Nove-akpa n'ọtụtụ ebe na ụlọ ọrụ foil aluminum. Ọ nwere ike inye aka n'ichepụta mmepụta mmepụta ihe dị ka ogologo mpịakọta nwere ike iru 10000m. Ọ na-emekwa ka emechara ngwaahịa na mma apperance.

b) Ala PVC

PVC Flooring bụ tumadi mere nke PVC, nakwa ndị ọzọ dị mkpa chemical ihe n'oge mmepụta. A na-emepụta ya site na calending, ọganihu extrusion ma ọ bụ ọganihu mmepụta ihe ọzọ, a na-ekewa ya na PVC Sheet Floor na PVC Roller Floor. Ugbu a, ndị na-emepụta ihe niile dị n'ime ụlọ na ndị mba ọzọ na-etinye ya dị ka oyi akwa nkwado iji zere njikọ ma ọ bụ nkwụsị n'etiti iberibe, nke a na-eme site na mgbasawanye ọkụ na nkwụsị nke ihe.

c) Ngwaahịa ụdị nke anaghị kpara akwa gbasiri ike

A na-eji scrim nke etinyere akwa akwa n'ọtụtụ ebe dị ka akwa akwa siri ike n'ụdị akwa anaghị kpara akpa, dị ka anụ ahụ fiberglass, akwa polyester, na-ehichapụ, yana ụfọdụ nsọtụ elu, dị ka akwụkwọ ahụike. Ọ nwere ike na-eme ka ọ dịghị onye kpara ike na elu tensile ike, ebe dị nnọọ tinye nnọọ obere unit arọ.